Heater Pick Up Pipe Assembly

A zinc plated mild steel pickup pipe assembly suitable for most diesel fuel powered heaters including Mikuni, Webasto and Wallas.

This pickup pipe is supplied as an assembly to be fitted to a Tek Tanks diesel tank, both custom built and Series A tanks.

The standard unit does not have enough thread length when used on the 10 and 12mm thick plastic.
Tek Tanks mount the pickup tube to a 5mm thick plate and 75mm in diameter allowing the nut to be tightened securely. The plate is then fitted to the tank with 5 x stainless steel self tapping screws and sealed with a nitrile gasket.

Length: 500mm

OD of pipe: 5mm

The pickup pipes are cut to length when fitted by Tek Tanks during the tank build. Please advise what length you would like the pipe cut to. Quite often they are cut shorter than the main feed pipe so as not to run out of fuel and prevent the engine being started.